HCR10C Series — Hydraulic Cylinder Rod End Bearing
HCR10C
Hydraulic Rod End Bearing
Metric sizes · Forged steel housing · Phosphated bearing steel raceway · Hydraulic-cylinder linkage applications
15
全仕様範囲
-50° to +150°C
Operating Range
任意の B
任意の N
| ポリウレタン | Size | A | B | M | F | J | L | L1 | Clearance | Dynamic | 荷重 | K | Tilt | 重量 | オス | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HCR10C-10 | 10 | 29 | 9 | 7 | 24 | 3 | 38.5 | 1.5 | 23-68 | 8.15 | 15.6 | 15 | 12 | 40 g | ||
| HCR10C-12 | 12 | 34 | 10 | 8 | 27 | 3 | 44 | 1.5 | 23-68 | 10.8 | 21.6 | 17.5 | 11 | 60 g | ||
| HCR10C-15 | 15 | 40 | 12 | 10 | 31 | 4 | 51 | 2 | 30-82 | 17 | 32 | 21 | 8 | 120 g | ||
| HCR10C-16 | 16 | 46 | 14 | 11 | 35 | 4 | 58 | 2 | 30-82 | 21.2 | 40 | 24 | 10 | 180 g | ||
| HCR10C-17 | 17 | 46 | 14 | 11 | 35 | 4 | 58 | 2 | 30-82 | 21.2 | 40 | 24 | 10 | 180 g | ||
| HCR10C-20 | 20 | 53 | 16 | 13 | 38 | 4 | 64.5 | 2 | 30-82 | 30 | 54 | 27.5 | 9 | 260 g | ||
| HCR10C-25 | 25 | 64 | 20 | 17 | 45 | 4 | 77 | 3 | 37-100 | 48 | 72 | 33.5 | 7 | 450 g | ||
| HCR10C-30 | 30 | 73 | 22 | 19 | 51 | 4 | 87.5 | 3 | 37-100 | 62 | 95 | 40 | 6 | 670 g | ||
| HCR10C-35 | 35 | 82 | 25 | 21 | 61 | 4 | 102 | 3 | 37-100 | 80 | 125 | 47 | 6 | 1020 g | ||
| HCR10C-40 | 40 | 92 | 28 | 23 | 69 | 4 | 115 | 4 | 43-120 | 100 | 156 | 52 | 7 | 1400 g | ||
| HCR10C-45 | 45 | 102 | 32 | 27 | 77 | 6 | 128 | 4 | 43-120 | 127 | 208 | 58 | 7 | 1930 g | ||
| HCR10C-50 | 50 | 112 | 35 | 30 | 88 | 6 | 144 | 4 | 43-120 | 156 | 250 | 62 | 6 | 2690 g | ||
| HCR10C-60 | 60 | 135 | 44 | 38 | 100 | 6 | 167.5 | 4 | 43-120 | 245 | 390 | 70 | 6 | 4600 g | ||
| HCR10C-70 | 70 | 160 | 49 | 42 | 115 | 6 | 195 | 5 | 55-142 | 315 | 510 | 80 | 6 | 7000 g | ||
| HCR10C-80 | 80 | 180 | 55 | 47 | 141 | 6 | 231 | 5 | 55-142 | 400 | 620 | 95 | 6 | 11000 g |
構造
レース：
- Bearing shell and inner ring: 100Cr6 / AISI 52100 bearing steel, hardened and ground, with phosphate and molybdenum-disulfide surface treatment.
- Housing: Forged St 52-3 steel for a compact hydraulic-cylinder rod end assembly.
- 潤滑： Sizes 10–12 have no lubrication fitting; sizes 15–20 use a grease hole; sizes 25–80 use a DIN 71412 hydraulic grease nipple.
- Temperature range: -50°C to +150°C under the stated material and lubrication configuration.
Ordering Notes
Application Notes
- Confirm the bore size, housing envelope and available misalignment angle before ordering.
- Use the static and dynamic load values as selection references; final suitability depends on the cylinder duty cycle, side load and lubrication interval.
- For a quotation, add the required rows to the quote list and include the hydraulic-cylinder drawing or target geometry when available.