Hydraulic-Cylinder Linkages
Use the published HCR10C dimensions and mounting geometry to review cylinder-side linkage fit.
Size 45 / 102 mm outer diameter / 128 mm lengthROD END / HEIM JOINT
HCR10C-45 Hydraulic Rod End Bearing, 45 mm Size
Part No.: HCR10C-45
· Male & female version available
✓ ISO 9001 Certified
✓ SGS Verified
✓ 26+ Years Factory
✓ OEM / ODM Ready
Size 45 mm
Inner ring width 32 mm
Diameter 6 mm
Dynamic load 127 kN
Static load 208 kN
Tilt angle 7°
Bearing Shell
100cr6 / aisi 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment
Inner Ring
100cr6 / aisi 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment
⚡ Typically responds within 24 hours
MOQ:50 pcs / model
Lead Time:7–15 days
Sample:Free (excl. freight)
Payment:T/T · PayPal · L/C
Overview
Hydraulic Rod End Bearing HCR10C Product Overview
HCR10C-45 is a metric hydraulic-cylinder rod end bearing for compact cylinder-side linkage assemblies. It combines a Forged St 52-3 steel housing with a bearing shell and inner ring made from 100Cr6 / AISI 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment.
The size-45 configuration has a 102 mm outer diameter, 32 mm inner ring width, 27 mm bearing width, 77 mm medium length, 6 mm diameter, 128 mm overall length, and 4 mm L1 length. Published performance values are 43-120 μm internal clearance, 127 kN dynamic load rating, 208 kN static load rating, 58 mm collar diameter, 7° tilt angle, and approximately 1930 g weight.
Hydraulic grease nipple to DIN 71412. The stated operating range is -50°C to +150°C. Confirm the cylinder geometry, side-load condition, clearance, lubrication access, and final material requirements against the HCR10C specification before production release.
Size Chart
Hydraulic Rod End Bearing HCR10C Series — Full Size Range
All available sizes in the Hydraulic Rod End Bearing HCR10C series. Can’t find your size? Contact us for custom dimensions.
| Part no. | [D] Size | [A] Outer diameter (mm) | [B] Inner ring width (mm) | [M] Bearing width (mm) | [F] Medium length (mm) | [J] Diameter (mm) | [L] Length (mm) | [L1] Length (mm) | Internal clearance (μm) | Dynamic load rating (kN) | Static load rating (kN) | [K] Collar diameter (mm) | Tilt angle (°) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HCR10C-10 | 10 | 29 | 9 | 7 | 24 | 3 | 38.5 | 1.5 | 23-68 | 8.15 | 15.6 | 15 | 12 | 40 |
| HCR10C-12 | 12 | 34 | 10 | 8 | 27 | 3 | 44 | 1.5 | 23-68 | 10.8 | 21.6 | 17.5 | 11 | 60 |
| HCR10C-15 | 15 | 40 | 12 | 10 | 31 | 4 | 51 | 2 | 30-82 | 17 | 32 | 21 | 8 | 120 |
| HCR10C-16 | 16 | 46 | 14 | 11 | 35 | 4 | 58 | 2 | 30-82 | 21.2 | 40 | 24 | 10 | 180 |
| HCR10C-17 | 17 | 46 | 14 | 11 | 35 | 4 | 58 | 2 | 30-82 | 21.2 | 40 | 24 | 10 | 180 |
| HCR10C-20 | 20 | 53 | 16 | 13 | 38 | 4 | 64.5 | 2 | 30-82 | 30 | 54 | 27.5 | 9 | 260 |
| HCR10C-25 | 25 | 64 | 20 | 17 | 45 | 4 | 77 | 3 | 37-100 | 48 | 72 | 33.5 | 7 | 450 |
| HCR10C-30 | 30 | 73 | 22 | 19 | 51 | 4 | 87.5 | 3 | 37-100 | 62 | 95 | 40 | 6 | 670 |
| HCR10C-35 | 35 | 82 | 25 | 21 | 61 | 4 | 102 | 3 | 37-100 | 80 | 125 | 47 | 6 | 1020 |
| HCR10C-40 | 40 | 92 | 28 | 23 | 69 | 4 | 115 | 4 | 43-120 | 100 | 156 | 52 | 7 | 1400 |
| HCR10C-45 | 45 | 102 | 32 | 27 | 77 | 6 | 128 | 4 | 43-120 | 127 | 208 | 58 | 7 | 1930 |
| HCR10C-50 | 50 | 112 | 35 | 30 | 88 | 6 | 144 | 4 | 43-120 | 156 | 250 | 62 | 6 | 2690 |
| HCR10C-60 | 60 | 135 | 44 | 38 | 100 | 6 | 167.5 | 4 | 43-120 | 245 | 390 | 70 | 6 | 4600 |
| HCR10C-70 | 70 | 160 | 49 | 42 | 115 | 6 | 195 | 5 | 55-142 | 315 | 510 | 80 | 6 | 7000 |
| HCR10C-80 | 80 | 180 | 55 | 47 | 141 | 6 | 231 | 5 | 55-142 | 400 | 620 | 95 | 6 | 11000 |
Quality Control
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Applications
Where Hydraulic Rod End Bearing HCR10C Rod Ends Are Used
Related Products
All Products →More from the Hydraulic Rod End Bearing HCR10C Series
Get a Quote
Request a Quote for the Hydraulic Rod End Bearing HCR10C Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Email
⚡ Reply in 24 hrs
🎁 Free samples
🔒 NDA available
📦 MOQ from 50 pcs
FAQ
Hydraulic Rod End Bearing HCR10C Frequently Asked Questions
HCR10C シリーズとは何ですか？
HCR10C は、寸法、クリアランス、負荷、発注データが公開されているメートル法油圧シリンダー ロッドエンド ベアリング シリーズです。
HCR10C の公開サイズはどれですか？
公開されている HCR10C の仕様表には、記載の範囲で15サイズが含まれます。
HCR10C にはどの材質が使われていますか？
ハウジング：鍛造 St 52-3 鋼。ベアリング シェルと内輪：100Cr6 / AISI 52100 ベアリング鋼、焼入れ・研削、リン酸塩および二硫化モリブデン表面処理付き。
HCR10C はどのように給脂しますか？
サイズ10〜12には給脂フィッティングがなく、サイズ15〜20は給脂穴を、サイズ25〜80は DIN 71412 の油圧グリースニップルを使用します。
HCR10C に記載されている温度範囲は何ですか？
HCR10C のページには、記載の材質と潤滑構成での動作範囲 -50°C〜+150°C が示されています。
HCR10C の見積もりには何を提供すればよいですか？
必要なサイズ、シリンダー側の取付ジオメトリまたは図面、デューティーサイクル情報、および給脂や材質に関する要件をお知らせください。