品番・シリーズ・材質・用途・仕様で検索できます。
Enterキーですべての結果を表示 Escで閉じる
Bore 0.4375 / 7/16-20 ThreadPCYMR7T / PCYML7Tは、内径0.4375″（B）、本体径1.312″（D）です。全体本体長さ（AM）は2.438″、ねじ込み長さ（CM）は1.500″です。幅（W）は1.000″です。概算重量：0.220 lbs。
14,449 lbの静的半径方向負荷および±58°の超高心ずれ角に対応する、2/7-16 UNF 20Aオスねじの3分割式オスロッドエンドで、最も広い心ずれ範囲が必要な航空宇宙用リンケージ、ステアリングシステム、高サイクルの産業制御機構に適しています。この拡張心ずれ範囲は、精密研削・硬質クロムめっきが施された特殊な大心ずれ対応52100軸受鋼ボールによって実現しています。
PTFEライナーはすべてのPCYM-T / PCYF-Tモデルに標準装備されており、初回設置時からメンテナンスフリー・無給油動作を実現します。スタッド構成（接尾辞Sを追加）もご利用いただけます。本体は4130クロモリ鋼で熱処理・黒染め（酸化被覆）処理済み、ボールは52100軸受鋼の硬質クロムめっき仕上げです。
All available sizes in the PCYM-T PCYF-T Metric 大偏角ロッドエンド series. Can’t find your size? Contact us for custom dimensions.
| RIGHT HAND PART NO. | LEFT HAND PART NO. | B DIA. +.0025 -.0005 | D DIA. +.010 -.010 | W WIDTH +.005 -.005 | T WIDTH +.005 -.005 | AM LENGTH +.015 -.015 | N THREAD UNF 3A | CM LENGTH +.062 -.031 | a° MIS. ANGLE REF. | STATIC RADIAL LOAD (LBS) | APPROX WEIGHT (LBS) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PCYMR6T | PCYML6T | 0.3750 | 1.125 | 0.875 | 0.390 | 2.125 | 3/8-24 | 1.375 | 46 | 11,050 | 0.14 |
| PCYMR7T | PCYML7T | 0.4375 | 1.312 | 1.000 | - | 2.438 | 7/16-20 | 1.500 | 58 | 14,449 | 0.22 |
| PCYMR8T | PCYML8T | 0.5000 | 1.500 | 1.250 | 0.470 | 2.625 | 1/2-20 | 1.625 | 60 | 16,240 | 0.33 |
| PCYMR8-10T | PCYML8-10T | 0.5000 | 1.750 | 1.250 | - | 2.875 | 5/8-18 | 1.750 | 65 | 24,158 | 0.44 |
| PCYMR10T | PCYML10T | 0.6250 | 1.750 | 1.375 | 0.531 | 2.875 | 5/8-18 | 1.750 | 48 | 21,219 | 0.51 |
| PCYMR10-12T | PCYML10-12T | 0.6250 | 2.000 | 1.375 | - | 3.375 | 3/4-16 | 2.000 | 64 | 30,290 | 0.68 |
| PCYMR12T | PCYML12T | 0.7500 | 2.000 | 1.500 | 0.651 | 3.375 | 3/4-16 | 2.000 | 54 | 29,127 | 0.79 |
| RIGHT HAND PART NO. | LEFT HAND PART NO. | B | D | W | T | AF | N | CF | a° | STATIC | LBS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PCYFR6T | PCYFL6T | 0.3750 | 1.125 | 0.875 | 0.390 | 2.125 | 3/8-24 | 1.062 | 46 | 11,050 | 0.20 |
| PCYFR8T | PCYFL8T | 0.5000 | 1.500 | 1.250 | 0.470 | 2.625 | 1/2-20 | 1.375 | 60 | 16,240 | 0.43 |
| PCYFR10T | PCYFL10T | 0.6250 | 1.750 | 1.375 | 0.531 | 2.875 | 5/8-18 | 1.562 | 48 | 21,219 | 0.57 |
| PCYFR12T | PCYFL12T | 0.7500 | 2.000 | 1.500 | 0.651 | 3.375 | 3/4-16 | 1.785 | 54 | 29,127 | 0.84 |
Material certifications verified. Composition confirmed by spectrometer before machining begins.
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Static and dynamic load tests run on representative samples from each production batch.
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Misalignment angle and torque measured to confirm liner performance meets specification.
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
The PCYMR7T / PCYML7T is a 2-piece male rod end with a 0.4375" bore and 7/16-20 external thread, built for aerospace linkages, steering systems, and high-cycle industrial control mechanisms.
Bore (B) is 0.4375", overall body length is 2.438", thread engagement is 1.500", width (W) is 1.000", and approximate weight is 0.220 lbs.
The PCYMR7T / PCYML7T is rated at 14,449 lb static radial load with an ultra-high misalignment angle of up to ±58° — well beyond a standard rod end's typical range.
The extra-wide misalignment range on the PCYMR7T / PCYML7T is achieved through a special high-misalignment 52100 bearing steel ball, precision ground and hard chrome plated, paired with a PTFE-lined race — this geometry lets the ball rock through a much larger angle than a standard-clearance rod end before the body contacts the shank.
The body is 4130 chromoly steel, heat treated and black oxide coated, with a PTFE-lined race for maintenance-free, lubrication-free operation. The ball is 52100 bearing steel, precision ground, heat treated, and hard chrome plated in the special high-misalignment geometry.
PCYMR7T is the right-hand thread version and PCYML7T is the left-hand thread version of the same male rod end — same size, materials, and rating, just opposite thread hand.
